Pellet Stove Furnace

Pellet stoves can be used as a secondary heating source or, with proper venting, a primary heating option. These stoves are available in freestanding models as well as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.

The auger moves pellets from the hopper into the combustion chamber, where they are burnt and produce heat. Sensors are used to monitor the fire and adjust its rate of operation to ensure your desired room temperature.

1. Energy Efficiency

Pellet stoves use renewable, non-toxic fuel made from compressed sawdust and other substances. They are typically disposed of in landfills, but can also be used to create a clean, efficient source of heat. As a result, they can help homeowners reduce their energy consumption and reduce greenhouse gas emissions. Many homeowners who own pellet stoves have reported that they've recouped their initial investment in just several years with lower heating costs.

Pellets are extremely compressed and more solid than natural wood, making them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also packed in plastic bags that are sealed to keep out moisture, and require less frequent cleaning.

Similar to other heating systems, pellet stoves need to be properly sized and vented. A skilled technician can assess your space and venting requirements to ensure the most efficient results.

In the process of installation, the hearth is constructed to fit the space and the vent is fitted through a pre-cut hole the siding of your home. The vent is then placed on the side wall or the roof, based on your preference and local regulations.

When the vent and hearth are complete then the pellet stove can be connected and turned on. Some manufacturers provide a remote control that makes starting and maintaining the fire easy while others come with additional sensors that monitor combustion, airflow flue temperature, pressure. If the system determines that it requires more pellets or less, it signals to the auger that it needs to accelerate or slow it down according to the need.

All stoves have a storage hopper that holds from 35 to 130 pounds of pellets until required. The size of the hopper determines how often you'll need to refill your stove. Larger hoppers permit longer periods before a refill is required. A grille draws fresh air from the room and passes it through an exchanger for heat, which then is able to blow heated air into the living space through convection. A grate or auger spreads the pellets, while the pan beneath collects any unburnt ones, along with the combustion residue.

While pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electricity-powered heaters. Electric components that drive motorized parts of the stoves require electricity. This could be an issue in the event of power failure, although backup systems such as generators and batteries are readily available.

2. Low Maintenance

Pellet stoves are incredibly efficient, but like any major heating appliance they require a bit of maintenance to ensure that they function properly. Cleaning your stove's exhaust vent and stove will prevent the accumulation of harmful creosote which could cause an explosion, fire, or damage to your home or stove.

A pellet stove is a device that burns compressed natural wood particles or other materials (like nutshells, corn kernels or small pellet stove pieces of scrap wood). The pellets are inserted into the combustion chamber by an auger that is powered by electricity. The rate at which the pellets are fed into the burner is controlled by the thermostat you set. The fire can be kept roaring, or it can be decreased or even extinguished depending on the temperature you set. The ash will be disposed in an empty ash tin underneath the burner. It is easily removed and disposed.

Pellets are made from waste products that could have been discarded during the process of processing lumber. They are renewable and release far less particulates into the air than traditional wood-burning stoves making them a cleaner burning heat source. The amount of carcinogens, carbon monoxide and other harmful chemicals emitted from pellet stoves is significantly lower than the more modern EPA certified wood stoves.

These appliances are not required to be vented through chimneys, as is the case with traditional wood stoves. Instead, they should be vented correctly through a wall, or any other exterior structure. Pellet stoves come with flue ports that open at the top or rear of the appliance and are connected to a vent pipe that extends outside of the home.

A pellet stove has one disadvantage: you have to purchase or store enough fuel pellets to last the whole winter season. Pellet stove owners typically use three tons of wood pellets per winter, for a price of $200 per ton. The cost can be high but they're less expensive than buying firewood and transporting it to a wood-burning stove or fireplace. You should buy enough pellets to ensure that your stove will run throughout the coldest winter months. Also, you require a location to keep the pellets (preferably dry and cool).

3. Reduced Carbon Footprint

Pellet stoves generate heat from renewable biomass fuel, reducing the need for finite fossil fuels. This helps reduce the carbon footprint and also helps diversify the sources of energy used pellet stoves for sale in homes.

Even the newest woodstoves that are EPA certified emit considerably less than pellet stoves. The emissions from pellet stoves also are much lower than ones from gas furnaces. Pellets can be made of sawdust and bark as well as other lumber fragments. They could also include soybeans, corn or other agricultural waste. When burned, they emit fewer particulates (leading to respiratory problems and allergies), carcinogens, carbon monoxide and the nitrous oxides.

The feed system is the main difference between a pellet stove and a wood stove. Pellet stoves have hoppers which hold the pellets. When the thermostat or sensors indicate that the room requires heating, the auger is turned and the pellets are fed into the combustion chamber where they are burned and generate heat. The combustion chamber's air is pumped through a heat exchanger that transfers heat to the blower. This process produces very little emissions, and creosote is not created.

After the hopper is empty, the ash is removed by a cyclone, and it is then deposited into an ash container. The stove also features an air circulator to move the warm, clean air throughout the living area. The majority of pellet stoves are made to be maintenance-free and come with a large view space for you and your family members to enjoy the flames.

The most significant factor affecting pellet stove emissions is the quality of the pellets. The poor quality pellets emit more emissions. When selecting your pellets ensure that they meet certain standards and do not contain other ingredients, such as urea or petroleum-based products. Also make sure you choose a manufacturer that offers a guarantee and will repair or replace parts in case of a problem. If you're looking to take an even greener approach certain states permit homeowners to get a tax credit when installing pellet stoves. This is a great opportunity to offset the initial cost of this kind of stove and make it more affordable pellet stoves to set up.

4. Reduced Noise

Pellet stoves generate less smoke and exhaust as compared to wood-burning fireplaces. A fan is used to spread heat more evenly throughout the room. This is the reason pellet stoves need less maintenance than wood stoves. While wood stoves require frequent cleaning of chemicals and particulates to avoid deterioration, pellet stoves can be cleaned with an electric vacuum cleaner.

Many manufacturers have designed their stoves so that they are easy to install and operate as well as maintain. They also make their appliances in a wide range of styles to match your home's decor. Some models include a programmable thermostat remote control, as well as WIFI apps that let you control and monitor your stove from anywhere in the world.

Most outdoor pellet stove stoves come with an enormous fuel hopper, which can hold anywhere from 35 to 130 pounds of pellets. The pellets are then pumped to the combustion chamber through an auger. The speed at which pellets are fed to the burner determines how hot the flame is and the heat output. The hopper can be filled with either hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). Many stoves are able to burn biomass pellets made from switchgrass and corn. This is a green alternative.

Pellet stoves produce less smoke and require less maintenance because they use a more clean fuel than fireplaces that burn wood. They do not need chimneys, making them the best option for retrofits or new construction.

In contrast to wood stoves, which require regular maintenance to keep free of creosote as well as other chemicals, pellet stoves only require periodic inspections for proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the motors and fans according to the model. Your appliance dealer can explain the correct procedures for the specific model and brand. He can also assist you to find the correct fuel for your stove, and give information on storage and safety.